CKTG 2oz CBN Spray 0.5 Micron

Cubic Boron Nitride (CBN) is the second hardest abrasive material after diamond, and in a spray emulsion it produces a distinctly refined edge finish. At 0.5 micron (32,000 grit), this spray is in the upper range of fine finishing compounds - it cuts efficiently and delivers a highly polished edge with a slight aggressive bite that many sharpeners prefer over the ultra-smooth feel of finer compounds. This is the go-to finishing spray in the CKTG sharpening shop.

Each 2oz bottle contains 10 carats of CBN powder in a spray emulsion. Apply 2-3 sprays to your strop, allow the liquid to absorb slightly, then strop at your sharpening angle using edge-trailing strokes. The compound loads into the strop and lasts through multiple sessions - shake well before each use. Works on kangaroo leather, bovine leather, denim, balsa, and other stropping substrates. CKTG particularly recommends it on roo leather for maximum refinement.

What Customers Are Saying: Two reviewers, both enthusiastic. Jeff Fallon compared this to numerous other sprays and pastes before writing a review and calls it the best he has used - noting it leaves a slightly aggressive edge character that he prefers, with better performance than competitors by a wide margin. The second reviewer noticed a significant improvement in edge quality compared to stropping without compound.

Care Instructions: Shake well before each use. Store at room temperature away from direct sunlight. Keep cap tight between uses.

• Brand: CKTG
• Abrasive: Cubic Boron Nitride (CBN)
• Grit: 0.5 micron (approx 32,000 grit)
• CBN Content: 10 carats per bottle
• Volume: 2 oz
• Use On: Leather, roo leather, denim, balsa
• Purpose: Final edge finishing and polishing