A saya is the traditional Japanese wooden blade scabbard - used to protect the edge during storage and transport, and to keep the knife from damaging other items in a drawer or bag. This CKTG saya is made from poplar wood: lightweight, slightly soft so it does not dull the edge on contact, and naturally moisture-absorbing. Each saya comes with a tapered black pin to keep the blade seated securely.
Fit is the critical detail with sayas. The best way to ensure a good fit is to purchase the saya at the same time as the knife, so we can use your actual knife as the template. If you are buying a saya separately, email us first or note the exact knife in the Comments section of your cart and we will confirm compatibility before shipping.
Japanese blacksmiths often work by hand and do not produce knives to a standardized dimension - two nakiris from two different makers, or even from the same maker in different batches, can vary meaningfully in blade height, spine thickness, and profile. At CKTG, we adjust sayas by hand for each knife: filing the interior, repositioning the pin hole, doing whatever is needed to get a proper fit. We only sell sayas for knives we carry - we cannot reliably guarantee fit for knives purchased elsewhere. If no saya is shown on a knife page, we do not have one that fits; a felt blade guard is recommended instead.
This saya is sized for nakiri knives in the CKTG lineup with thinner spines. Nakiri dimensions vary significantly between makers: blade height can range from 45mm to 60mm, and spine thickness from 2mm to 5mm across the knives we carry. Buying with the knife is strongly recommended.
Care Instructions: Do not store a wet or damp knife in a saya - poplar wood absorbs moisture, and a damp environment can promote rust on carbon steel blades and cause the wood to swell, affecting fit. Wipe the blade dry before inserting. Air the saya out periodically. If the fit becomes tight, allow both knife and saya to dry fully before use.Material: Poplar Wood
Includes: Tapered Black Pin
Fit: Hand-adjusted at CKTG for each knife
Note: Purchase with knife for best fit. Email us to confirm compatibility if ordering separately.
Fit is the critical detail with sayas. The best way to ensure a good fit is to purchase the saya at the same time as the knife, so we can use your actual knife as the template. If you are buying a saya separately, email us first or note the exact knife in the Comments section of your cart and we will confirm compatibility before shipping.
Japanese blacksmiths often work by hand and do not produce knives to a standardized dimension - two nakiris from two different makers, or even from the same maker in different batches, can vary meaningfully in blade height, spine thickness, and profile. At CKTG, we adjust sayas by hand for each knife: filing the interior, repositioning the pin hole, doing whatever is needed to get a proper fit. We only sell sayas for knives we carry - we cannot reliably guarantee fit for knives purchased elsewhere. If no saya is shown on a knife page, we do not have one that fits; a felt blade guard is recommended instead.
This saya is sized for nakiri knives in the CKTG lineup with thinner spines. Nakiri dimensions vary significantly between makers: blade height can range from 45mm to 60mm, and spine thickness from 2mm to 5mm across the knives we carry. Buying with the knife is strongly recommended.
Care Instructions: Do not store a wet or damp knife in a saya - poplar wood absorbs moisture, and a damp environment can promote rust on carbon steel blades and cause the wood to swell, affecting fit. Wipe the blade dry before inserting. Air the saya out periodically. If the fit becomes tight, allow both knife and saya to dry fully before use.
Reviews
10 review(s) WRITE A REVIEW (Reviews are subject to approval)
Works well on my nakiri
Nikiri Saya.
Nakiri saya
A bit rough, but gets the job done.Posted By: Tristen N.
5 people found this review helpful
Bought this for my Masutani nakiri. It fits fine, but it has some REALLY rough edges. A bit of sandpaper and some varnish or something to seal up the wood and it'll be great!! Also wish there was a piece of string to hold the pin in place. I lost it earlier at work (luckily I found it under the grill)
5 people found this review helpful
Bought this for my Masutani nakiri. It fits fine, but it has some REALLY rough edges. A bit of sandpaper and some varnish or something to seal up the wood and it'll be great!! Also wish there was a piece of string to hold the pin in place. I lost it earlier at work (luckily I found it under the grill)
Nice Saya however,Posted By: Kevin Fleming - verified customer
5 people found this review helpful
The quality of this product is superb... the fit isn't but it's expected when this is considered and universal piece, meant to fit a variety of knives.
My Nakiri slides in, the pin sticks hard and is difficult to remove, but that also means it wont fall out during travel and has so far proven to be an excellent option for keeping my nakiri safe from harm.
The fact that this is an after market item, built with exceptional quality and does hold up to chef and professional cooks abuse and travel... storage is superb.
It wobbles and isnt snug or even close to snug, but it hasn't scratched or dulled my edge, I'd say its quality and that I'm being picky!
5 people found this review helpful
The quality of this product is superb... the fit isn't but it's expected when this is considered and universal piece, meant to fit a variety of knives.
My Nakiri slides in, the pin sticks hard and is difficult to remove, but that also means it wont fall out during travel and has so far proven to be an excellent option for keeping my nakiri safe from harm.
The fact that this is an after market item, built with exceptional quality and does hold up to chef and professional cooks abuse and travel... storage is superb.
It wobbles and isnt snug or even close to snug, but it hasn't scratched or dulled my edge, I'd say its quality and that I'm being picky!
Nakiri Saya
Nice
Nice SayaPosted By: V Bedrosian - verified customer
3 people found this review helpful
I bought this to fit a tanaka nakiri that I purchased at the same time. Very nice product! Pin fit perfectly and unlike ones I've bought from other retailers it's tapered so it doesn't fall out.
3 people found this review helpful
I bought this to fit a tanaka nakiri that I purchased at the same time. Very nice product! Pin fit perfectly and unlike ones I've bought from other retailers it's tapered so it doesn't fall out.
The pin doesn't fit










