- Knife Brands
Knife Brands- Anryu Hamono
- Artifex
- CCK Cleavers
- Chopper King
- Daovua Knives
- Doberman Forge
- Doi Knives
- Enami Knives
- Enjin Knives
- Gihei Knives
- Harukaze Knives
- Hatsukokoro Knives
- Hinokuni Knives
- Ishikawa Knives
- Kamo, (Katsuyasu)
- Kamo, (Shiro)
- Kanehide Knives
- Kanjo Knives
- Karaku Knives
- Katayama Knives
- Kato (Yoshimi)
- Kikuichi Knives
- Kikumori Hamono
- Kitaoka Knives
- Kobayashi Knives
- Kohetsu Knives
- Konosuke Knives
- Kotetsu Knives
- Kurosaki Knives
- Kurotori Knives
- MAC Knives
- Makoto Knives
- Masakage Knives
- Masamoto Knives
- Masui Knives
- Masutani Knives
- Matsubara Knives
- Mikisyo Hamono
- Misuzu Knives
- Myojin Knives
- Knife Types
- Accessories
Accessories
- Add On Items
- Blade Guards
- Carbon Steel Pots & Pans
- Chef Equipment
- Chopsticks
- Cutting Boards
- Higo Folders, Hunters
- Gift Ideas
- Hand Held Sharpeners
- Kitchen Tools
- Kitchen Shears
- Knife Bags
- Knife Sharpeners
- Knife Sharpening Service
- Knife Storage
- Peelers & Tweezers
- Sayas
- Sharpening Accessories
- Sharpening Steels
- Sharpening Stones
- Shop by Steel
- Suppliers
- New Arrivals
- Resources
- forum
This board is handcrafted from the indigenous Eastern Canadian Larch by local craftsmen from Cape Breton Island, Nova Scotia. Your board will last a lifetime if properly cared for. A long-standing best-seller, our medium cutting board is an original Larch Wood design. The perfect combination of a good size working space and the durability of an end-grain design.
Perfect for daily kitchen use
Individually chosen end-grain patterns
Handcrafted from robust Canadian larch
Board size is 17.75 x 13.5 x 1.6 inches (45.1 × 34.3 × 4.1 cm)
Board weighs 8.5 lbs (3.9 kg)
Never submerge in water.
Never place in a dishwasher
Never leave the board in areas of concentrated heat
Never place a hot skillet or pot from a burner or oven directly on the board
Your new cutting board should be seasoned to allow it to adapt to your home or work environment. Apply Chefknivestogo Board Wax to all surfaces of your board on a weekly basis for the first month. Once the board is seasoned we recommend a monthly treatment to prevent the wood fibers from drying out.
To apply, rub a thin coat of the conditioner on the top, sides and bottom with a dry cloth and allow it to absorb. Buff to a shine with a soft dry cloth.
Use a moist cloth or sponge to remove any dirt. Sticky residue can be cleaned by using a small amount of mild detergent on the scrubby side of a sponge while holding the board under warm running water.
To clean even more thoroughly, apply salt to the board and rub with a sponge that has been dampened with lemon juice or just use a lemon cut in half.
Do not store the board in a hot place ie: close to direct sunlight or a heat source. Dry the cutting board carefully before storing in a cupboard.
Your new cutting board should be seasoned to allow it to adapt to your home or work environment. Apply Chefknivestogo Board Wax to all surfaces of your board on a weekly basis for the first month. Once the board is seasoned we recommend a monthly treatment to prevent the wood fibers from drying out.
To apply, rub a thin coat of the conditioner on the top, sides and bottom with a dry cloth and allow it to absorb. Buff to a shine with a soft dry cloth.
Use a moist cloth or sponge to remove any dirt. Sticky residue can be cleaned by using a small amount of mild detergent on the scrubby side of a sponge while holding the board under warm running water.
To clean even more thoroughly, apply salt to the board and rub with a sponge that has been dampened with lemon juice or just use a lemon cut in half.
Do not store the board in a hot place ie: close to direct sunlight or a heat source. Dry the cutting board carefully before storing in a cupboard.
